اتصل بنا لمعرفة المزيد
the
technology
Clean indoor air has always come at a cost.
Capturing smaller particles means denser filters, higher resistance, and rising energy and maintenance demands. As outdoor air quality worsens, HVAC systems are pushed harder, still relying on decade-old filtration logic.
HiboCare changes the equation.
By using Airborne Particle EngineeringTM, we enable cleaner air without added resistance or energy use.
1
Electric field charges surrounding particles for continuous capture
2
Viruses, bacteria, and mould neutralised by electric field
3
Particles get charged and clump together which makes them easier to capture by standard G4-filters
4
Charged particles interact with filter fibers resulting in higher filtration efficiency
1.electrostatic screen
At the core of HiboCare’s technology is an electrically active screen that influences airborne particles as air moves through the HVAC system.
Housed in a protective frame, the HiboScreen uses porous polyurethane (PU) foam coated with HiboCare’s micronised graphite. When stimulated with low-voltage current and controlled electrostatic charge, the coating creates a conductive, irregular membrane across the air stream.
2. particle
clumping
As particles pass through the electrically active screen, they are exposed to a controlled electric field that causes them to become polarised and, in some cases, lightly charged.
This alters how particles interact with one another downstream: oppositely charged and polarised particles naturally attract, rotating and bonding on contact. The result is fused particles, where microscopic particles cluster into larger, heavier groups.
3. effective filtration
As particles cluster into larger groups, they become much easier to remove. These larger particles can no longer flow cleanly with the air and are more likely to collide with and stick to the fibres of a standard G4 filter.
Even particles that do not fully cluster remain polarised, increasing their chance of being captured on contact. This allows existing G4 filters to remove far more fine particles without increasing filter density or energy use.
Why choose Hiboscreen
clean air, everywhere
Clinical-grade indoor air quality easy accessible across entire buildings
existing hvac setup
Works with existing G4 filters as a simple retrofit. Minimal disruption and downtime
Cleaner coils
Less buildup on coils means better heat transfer, which results in energy savings
healthier occupants
Lower harmful exposure from reduced fine particulate matter
energy savings
Higher particle removal at lower costs, decreasing building energy usage
new air standard
Smarter particle engineering in existing filters = redefined clean air